Amplifiers & Pre-Amps, Home Theater & AudioPages 1 2 SPKR HFW CA308 SNGL SOURCE 4ZONE AMP 4 ZONE/8 CHAN 30WATT PER CHANNEL CONNECTS TO A SINGLE AUDIO SOURCE SPKR HFW CA308 SNGL SOURCE 4ZONE AMP 4 ZONE/8 CHAN 30WATT PER CHANNEL CONNECTS TO A SINGLE AUDIO SOURCE FOUR INDIVIDUAL ZONE ON/OFF SWITCHES AND ZONE VOLUMES
Monster MPP AVS2000 SS UHC
1:4 RECLOCKING SDI DA
Amplified IR Connection Amplified IR Connection Block
CABLES TO GO 4-OUTPUT S-VIDEO + AUDIO DIST. AMP.
AS 75 WATT STEREO AMP 250 WATTS AT 8 OHM
AS 80 WATT STEREO AMP 250 WATTS AT 8 OHM
AS 150 WATT STEREO AMP 450 WATTS AT 8 OH
50W 2 Channel Power Amplifier MODEL- AMP-150 VENDOR- PHOENIX GOLD FEATURES- 50 Watt 2-Channel Power Amplifier 2 Independent channels rated at 50 watts into 8 ohms 100 watts per channel into 4 ohms 200 watts Bridged Mono 8 ohms Independent Volume and Balance Front Panel Controls -- SPECIFICATIONs ------------------------------------FREQUENCY RESPONSE - 20Hz - 20KHzPOWER SOURCE - 110/220 VAC; Consumption: 700W (All channels driven)DIMENSIONS - 16.5"w x 2.75"h x 8.0"dwww.audiosource.net
AV 400 4-WAY COMPOSITE DISTRIB AMPLIFIER BY CABLE ELECTRONICS INC This AV 400 audio / video amplifier accepts a base band composite audio / video signal via RCA type cables from any source and distribute it out to a maximum of four monitors, TVs, or any device looking for an audio or video signal, all without any signal loss.
Monster Home Theater® Signature Series Music Reference Two Channel Power Amplifier Technologically and aesthetically matched to other Monster Power components, these power amplifiers are powerful. Attractive. Reliable. Advanced. And backed by the Monster brand name and reputation--with our hallmark higher-grade components and high-end design. Based on the success of our Home Theatre PowerCenters, the 2250 was constructed to deliver enough dedicated, ultra high performance amplification necessary to reproduce movies and music sound as accurately as the artists intended you to hear it.
Each channel comes equipped with independent power supplies and toroidal transformers for more efficient transmission of power. Large capacitance filter caps provide the kind of reserves needed to prevent power sags and low-frequency clipping when all channels are driven. Finally, the advanced circuitry uses Monster's unique push/pull technology on the input/output stage to deliver ultra-wide bandwidth performance for best reproduction of high-resolution 192kHz DVD-A and SACD formats.
Created in part by Richard Marsh--one of the world's leading designers and developers of high performance consumer electronics--and conceived, designed, tested and used by the Head Monster himself, these units were built by the experts for those who demand the best.
* Monster Mirrored Amplifier Technology™ ensures low distortion, greater clarity even at the highest power levels. * Laboratory-grade digital power meters monitor actual power output and dynamic range. * 250 watts per channel, 500 watts total with all channels driven. * 400 continuous watts all channels driven into 4 Ohms, instantaneous peak power all channels driven greater than 300 watts per channel/8 Ohms, 500 watts/4 Ohms. * Balanced complimentary push-pull input stage delivers ultra-wide bandwidth performance for best reproduction of high-resolution 192kHz DVD-A and SACD formats. * High Current MOSFET output transistors for instantaneous current and maximum transient impact. * Separate transformers and power supplies on each channel prevents power sag when all channels driven. * On/Off Triggers enable one remote control to operate entire system. * Triple shielded extra long Monster PowerLine 400 power cord rack ears for front and rear included. * Embossed plate with The Head Monster, Noel Lee’s Signature.
Specifications: MPA2250
Power Output Stereo 250W @ 8 Ohm 20Hz to 20kHz All Channels Driven 400W @ 4 Ohm Bridged Mono 650W @ 8 Ohm Current Capacity Per Channel 32A Slew Rate 45v per uSec Frequency Response 20 Hz- 20KHz +/- 0.1 dB (-3dB @ 300Khz) THD - 20Hz to 20kHz @ 8 Ohm / 250w < 0.05% IMD 0.06% Dynamic Headroom 1.1dB Interchannel Crosstalk > 60 dB down from 20Hz to 20 KHz Input Impedance Unbalanced 24K Ohm Balanced 50K Ohm Input Sensitivity 1.55Vrms for 250W 8 Ohm Output Gain 29dB Bandwidth 300 Khz (-3dB) S/N Ratio 110 dB A-Weight Damping Factor 500 DC Trigger Inputs 3-30V AC/DC DC Trigger Output 12V DC 100mA Power Requirements Standby 105W Full Power 900W @ 250W/Ch 8 Ohm 1500W @ 400W/Ch 4 Ohm Dimensions Width Without Rack Ears 17in / 434mm With Rack Ears: 19in / 484mm Height With Feet: 7.75in / 193.5mm Without Feet: 7in / 177mms Depth 20.25in / 514mm Weight Net Weight: 75lbs / 34kg Shipping Weight: 88lbs / 40kg
80W 2 Channel Power Amplifier 80 watts RMS per channel power amplifier with complete custom installer feature setBridgeable outputs for 250 watts RMS total output powerTorrodial Power SupplyAutomatic source switching with adjustable delay timer (3-15 seconds)Two sets of speaker outputs selectable from the front panelFront mounted main volume and balance controlsRear mounted master level controls for setting max output levelsFlexible Power-on: Switched, Signal Sensing, and 12v trigger5 way speaker wire binding posts for bare wire or Banana plugs
Pages 1 2
|